De-icers

What are Deicers Used For?

Winter weather conditions can result in icy roads and walkways which can be hazardous. Deicers can help in controlling this situation. A deicer is a unique substance that can melt the ice and prevent its formation. What it will do is it will lower down the freezing point of water and avoid any connection between the i...

What are Deicers Used For?

Winter weather conditions can result in icy roads and walkways which can be hazardous. Deicers can help in controlling this situation. A deicer is a unique substance that can melt the ice and prevent its formation. What it will do is it will lower down the freezing point of water and avoid any connection between the ice and paved surfaces. 

Snow and ice can be amazing, but what if they are all over the sidewalks, driveways, or in your backyards and patios? There are a lot of De-icers Products out there that can melt ice and snow. However, which one should you choose? Are you going to use calcium chloride, rock salt, etc.?

With so many de-icing products on the market today, choosing the best method of melting the ice and snow can be a difficult decision. 

Liquid Deicer

The de-icing process can be accomplished in a lot of ways. One of the most common methods for de-icing and preventing ice formation is using liquid de-icers. This is advantageous since they are environmentally friendly and offer low corrosion. 

This product can be used in different areas including ramps, sidewalks, doorways, steps, walking platforms, and many more. Most often, this is favored over granular deicer agents since there are no residues left behind. Also, they are ready to use and non-toxic.

There is no need to dilute or mix it. This can be applied before or after a storm. It offers at least 48 hours of activity before the storm.

What is the Best Liquid Ice Melt Sprayer?

If you don’t want to spread rock salt all over the area, then the best option is liquid deicer sprayers. This is preferred by most snow removal experts. There are different kinds of ice melt sprayers that are available on the market right now.

Depending on your specific circumstance, you might prefer one method from the other. The following are the different categories of deicer sprayers.

ATV-mounted Sprayer

Not all jobs require a truck and some can’t even accommodate one. Simply use an ATV-mounted sprayer, wherever you want to go. These ATV sprayers are perfect for those who require more maneuverability and mobility.

Backpack Sprayer

Sometimes using your own two feet is more convenient than using a vehicle. With backpack sprayers, you will have more freedom, most especially in maneuvering around obstacles. It can save you money and offers extreme mobility. 

Tow-Behind Sprayer

Tow-behind deicer sprayers are quite similar to ATV sprayers. Most often, they are attached to a vehicle and sprayed behind it. However, due to the way that they are hitched, tow-behind sprayers are more flexible. You can carry a tow-behind sprayer on a UTV, an ATV, or any type of vehicle that you are driving.

Handheld Sprayer

If you are searching for a less expensive deicing sprayer that can accomplish small jobs, then the best option is handheld sprayers. They are ideal for people who would like to do their own deicing. Keep in mind that they are not designed for bigger jobs, however, they can work great on a small property. 

If you have a snow removal company, then this is not the best option for you. A handheld sprayer is only meant for small areas such as a small parking lot or a modest storefront.

Truck Mounted Sprayer

The truck-mounted deicing sprayer is perfect for those who have clients and have the capacity to invest in some serious hardware. If you want to complete the job in an efficient manner, then you should have the right tools for it.  

How to De-Ice Windshield in the Winter?

With a de-icer spray, you can quickly eliminate snow and ice much easier. In order to prepare for the morning cold weather, you can mix it on the night before. You can even keep a spray bottle filled with a deicing solution in your car during the winter season. 

There are two ways of making your solution:

Salt Water Solution

To make this solution, you can use road salt or table salt and combine a couple of spoonfuls into the water until it is saturated. Be sure to put it on a glass and do not use any metal since salt corrodes metal. Basically, salt water is effective in melting ice and snow because its freezing point is lower than water. 

Rubbing Alcohol Solution

Mixing water and isopropyl rubbing alcohol are greatly recommended. Mix one-third water and two-thirds rubbing alcohol in a spray bottle. Shake the solution and spray it on your windshield. You will notice that the ice and frost will start to disappear. After turning on your windshield wipers, you can enjoy having a clear windshield in an instant.

You can keep this handy during those winter months to instantly clear your windshield of snow and frost, especially during the morning. Generally, it is safer to use the rubbing alcohol solution since it has a lesser risk of damaging the seal around your windshield and the paint of your car.

When Should You Use a Dock Deicer?

A Dock Deicer is designed to maintain water circulation and prevent ice from forming in a particular area. Also known as aerators or bubblers, Dock De-Icers can be used for protecting your boathouse, dock, or boat from ice damage. Although they can also be used in ponds to prevent fish kill since they can always keep the water open.

Dock De-Icers are an inexpensive way of preventing winter ice damage, whether you are worried about damaging your boathouse or dock or concerned about fish kill. Most people install deicers once the water gets frozen on the surface. Usually, they bore a hole in the ice. Nevertheless, it is much better if De-Icers are installed in the fall.

What is a Dock Deicer?

A dock deicer has a very simple mechanism. With its high-speed propeller, warmer water will be brought to the surface resulting in open water. The standard de-icers are available in ½ or 1 HP models. While the industrial de-icers are available in ½, 1, 1.5, 2, and 3 HP models.

These de-icers can move from 500 to 2700 gallons of water each minute, depending on the model that you purchase. Typically, de-icers can run a depth of 3-5’ below the surface. There should be at least 1’ clearance from the deicer to the lake bed. This is essential to guarantee that the unit can perform well.

Taylor Made De-icers come with various De-icers Parts and accessories. This includes plastic propellers, Thermostats, Replacement Zinc Anodes, Black Poly-Pro Float, and Dock Mounting Kit. The propeller will move the water and bring it to the surface to keep a certain area ice-free.

What is De-icers Aerator Anode Used For?

Tecnoseal De-icers zinc anode is used for preventing corrosion. It is categorized as a galvanic anode along with the other types of galvanic anodes which are built from magnesium or aluminum.

The Kasco Deicer Zinc Anode Replacement can protect the Kasco De-Icer from expensive motor damage caused by corrosion and erosion. This component will likely corrode, that is why it is important that they should be replaced when the half part has already corroded. Corrosion develops faster in saltwater. That is why as a matter of precaution it is essential that the zinc anode should be checked periodically at least every two to three months.

More

All Products in Category

• 

  Quick view

  Add to compare

  De-Icer Aerator Anode - .63" Shaft - Zinc

  De-Icer Aerator Anode - .63" Shaft - Zinc

  Tecnoseal TKA01

  $12.82 Restocking Soon, Reserve Yours Today!

  0 review

  Restocking Soon, Reserve Yours Today!

  Tecnoseal TKA01

  View more

  Add to compare

  Quick view
• 

  Quick view

  Add to compare

  De-Icer Aerator Anode - 0.50" Shaft - Zinc

  De-Icer Aerator Anode - 0.50" Shaft - Zinc

  Tecnoseal TKA02

  $10.37 Restocking Soon, Reserve Yours Today!

  0 review

  Restocking Soon, Reserve Yours Today!

  Tecnoseal TKA02

  View more

  Add to compare

  Quick view
• 

  Quick view

  Add to compare

  6216 Thermostat 30 Deg On / 40 Deg Off - Freshwater Recommended

  6216 Thermostat 30 Deg On / 40 Deg Off - Freshwater Recommended

  Taylor Made 6216

  $126.60 Restocking Soon, Reserve Yours Today!

  0 review

  Restocking Soon, Reserve Yours Today!

  Taylor Made 6216

  View more

  Add to compare

  Quick view
• 

  Quick view

  Add to compare

  6215 Thermostat 25 On/35 Off - Saltwater Recommended

  6215 Thermostat 25 On/35 Off - Saltwater Recommended

  Taylor Made 6215

  $109.94 Restocking Soon, Reserve Yours Today!

  0 review

  Restocking Soon, Reserve Yours Today!

  Taylor Made 6215

  View more

  Add to compare

  Quick view
• 

  Quick view

  Add to compare

  Replacement Prop - 1/2 & 3/4 HP Oil Free

  Replacement Prop - 1/2 & 3/4 HP Oil Free

  Taylor Made A-24417P

  $49.60 Restocking Soon, Reserve Yours Today!

  0 review

  Restocking Soon, Reserve Yours Today!

  Taylor Made A-24417P

  View more

  Add to compare

  Quick view
• 

  Quick view

  Add to compare

  De-Icer Anode - .63" Aluminum - 5/8" Shaft - 1HP

  De-Icer Anode - .63" Aluminum - 5/8" Shaft - 1HP

  Tecnoseal TKA01AL

  $13.44 Restocking Soon, Reserve Yours Today!

  0 review

  Restocking Soon, Reserve Yours Today!

  Tecnoseal TKA01AL

  View more

  Add to compare

  Quick view
• 

  Quick view

  Add to compare

  De-Icer Anode - .50" Aluminum - 1/2" Shaft - .5HP/.75HP

  De-Icer Anode - .50" Aluminum - 1/2" Shaft - .5HP/.75HP

  Tecnoseal TKA02AL

  $10.85 Restocking Soon, Reserve Yours Today!

  0 review

  Restocking Soon, Reserve Yours Today!

  Tecnoseal TKA02AL

  View more

  Add to compare

  Quick view