Curt Manufacturing
WHAT IS RACE GAS?
-
THE PROOF IS IN THE FORMULA
While Motorsports Fuel and Equipment was founded in 2011, development of its first product started three years earlier with an expensive race engine destroyed by bad racing fuel. While competing in a road course race, our founder burned a hole in the piston of a very expensive flat six motor. When the engine was torn down there were signs of detonation in each cylinder. Even though the pump at the track stated the fuel was 110 octane, the destroyed engine told a much different story.
At this point the search went out to find equipment that could be used to measure the octane of fuel before putting it in the tank. Options were very limited and extremely expensive. As it turns out there really is no easy or inexpensive way to test the octane of race fuel in the field. As a result we began to look at the problem from the other end, the race fuel itself.
Due to several changes in federal and Minnesota state law it is nearly impossible to legally transport large quantities of fuel by highway. So our search began for a product that we could add to pump gas to raise the octane and energy to that of race fuel. We found a few products that claim they could raise the octane but couldn't verify or guarantee the octane levels it could achieve. We also found some enthusiast websites that had recipes for "home brew" octane boost. When we analyzed these "home brews" we found that the components in these blends would damage the engine, not raise the octane significantly, or both.
Over the course of the next two years, we spoke with hundreds of experts and analyzed hundreds of blends. We created several "test candidates" that were tested by our two independent laboratory partners. After much searching, we finally came up with the one that we thought performed the best. As we moved forward to put this formula into production, the federal government stepped in. Our blend used too much organometallic compounds to be produced legally. While at the time we felt this was a huge setback, it actually turned out to be the giant leap forward.
The federal ban caused our several chemists and petrochemical suppliers to formulate the blend that became RACE GAS. When we tested this blend using ASTM D 2699 and 2700 tests, the new formula blended with pump gas produced results better than the formula originally banned by the Government. his blend performed better than anything else we had seen or tested! We had found the sweet spot for our product.
Since then we have used RACE GAS in everything from a 944 Turbo race car, a modified Audi TT, a Hemi Magnum, a Hemi Challenger, and modified VW R32, a Corvette and many other cars. All demonstrated increases in power, throttle response, and torque, (you can see the dyno test results of many of these cars on our test results page).
While we are thrilled to bring RACE GAS to the enthusiast market we are not satisfied there. Over the next year we will be launching several other motor sports products like RACE GAS Leaded formulation, RACE GAS Ctane, and RACE GAS Drag blends. It is our ongoing mission to bring high quality, unique, products to the motor sports market.
2" Trailer Ball (1" x 2-1/8" Shank, 6,000 lbs., Stainless)
Curt ManufacturingCurt Manufacturing 40053
2" Trailer Ball (1" x 2-1/8" Shank, 7,500 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40037
2" Trailer Ball (1" x 3" Shank, 6,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40020
2" Trailer Ball (1" x 3" Shank, 6,000 lbs., Chrome, Packaged)
Curt ManufacturingCurt Manufacturing 40074
2" Trailer Ball (1-1/4" x 2-5/8" Shank, 10,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40090
2" Trailer Ball (1-1/4" x 2-5/8" Shank, 10,000 lbs., Chrome, Packaged)
Curt ManufacturingCurt Manufacturing 40069
2" Trailer Ball (3/4" x 1-3/4" Shank, 3,500 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40003
2" Trailer Ball (3/4" x 1-3/4" Shank, 3,500 lbs., Chrome, Packaged)
Curt ManufacturingCurt Manufacturing 40064
2" Trailer Ball (3/4" x 2-1/8" Shank, 3,500 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40018
2" Trailer Ball (3/4" x 2-1/8" Shank, 3,500 lbs., Chrome, Packaged)
Curt ManufacturingCurt Manufacturing 40065
2" Trailer Ball (3/4" x 3" Shank, 3,500 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40019
2" Trailer Ball (3/4" x 3" Shank, 3,500 lbs., Chrome, Packaged)
Curt ManufacturingCurt Manufacturing 40073
2-1/2" Rubber Hitch Tube Cover
Curt ManufacturingCurt Manufacturing 22277
2-5/16" A-Frame Coupler with Easy-Lock (10,000 lbs., Black)
Curt ManufacturingCurt Manufacturing 25200
2-5/16" OEM-Style Gooseneck Hitch Ball, 30,000 lbs.
Curt ManufacturingCurt Manufacturing 60629
2-5/16" Trailer Ball (1" x 2-1/4" Shank, 10,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40007
2-5/16" Trailer Ball (1" x 2-1/4" Shank, 12,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40039
2-5/16" Trailer Ball (1" x 2-1/4" Shank, 12,000 lbs., Raw Steel)
Curt ManufacturingCurt Manufacturing 40042
2-5/16" Trailer Ball (1" x 2-1/8" Shank, 7,500 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40005
2-5/16" Trailer Ball (1" x 2-1/8" Shank, 7,500 lbs., Chrome, Packaged)
Curt ManufacturingCurt Manufacturing 40067
2-5/16" Trailer Ball (1" x 2-1/8" Shank, 7,500 lbs., Stainless)
Curt ManufacturingCurt Manufacturing 40054
2-5/16" Trailer Ball (1" x 2-1/8" Shank, 7,500 lbs., Stainless, Packaged)
Curt ManufacturingCurt Manufacturing 40084
2-5/16" Trailer Ball (1" x 3" Shank, 6,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40021
2-5/16" Trailer Ball (1" x 3" Shank, 6,000 lbs., Chrome, Packaged)
Curt ManufacturingCurt Manufacturing 40075
2-5/16" Trailer Ball (1-1/4" x 2-3/4" Shank, 20,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40008
2-5/16" Trailer Ball (1-1/4" x 2-5/8" Shank, 1" Rise, 10,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40035
2-5/16" Trailer Ball (1-1/4" x 2-5/8" Shank, 10,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40006
2-5/16" Trailer Ball (1-1/4" x 2-5/8" Shank, 10,000 lbs., Chrome, Packaged)
Curt ManufacturingCurt Manufacturing 40068
2-5/16" Trailer Ball (1-1/4" x 2-5/8" Shank, 15,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40030
2-5/16" Trailer Ball (1-1/4" x 2-5/8" Shank, 2" Rise, 10,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40036
2-5/16" Trailer Ball (1-1/4" x 2-5/8" Shank, 2" Rise, 25,000 lbs., Raw Steel)
Curt ManufacturingCurt Manufacturing 40087
2-5/16" Trailer Ball (1-1/4" x 2-5/8" Shank, 25,000 lbs., Raw Steel)
Curt ManufacturingCurt Manufacturing 40086
2-5/16" Trailer Ball (1-1/4" x 2-5/8" Shank, 30,000 lbs., Raw Steel)
Curt ManufacturingCurt Manufacturing 40085
2-5/16" Trailer Ball (1-1/4" x 3" Shank, 6,000 lbs., Chrome)
Curt ManufacturingCurt Manufacturing 40022
2-5/16" Trailer Ball (1-1/4" x 3" Shank, 6,000 lbs., Chrome, Packaged)
Curt ManufacturingCurt Manufacturing 40076
2-5/16" Trailer Ball (2" x 3-1/2" Shank, 30,000 lbs., Raw Steel)
Curt ManufacturingCurt Manufacturing 40088
2-5/16" Weld-On Gooseneck Ball
Curt ManufacturingCurt Manufacturing 40094
2.44" Bearing Protectors & Covers (2-Pack)
Curt ManufacturingCurt Manufacturing 22244
21" x 37" Roof Rack Cargo Carrier Extension
Curt ManufacturingCurt Manufacturing 18117
22" Raw Steel Hitch Bar
Curt ManufacturingCurt Manufacturing 49535
24" Raw Steel Receiver Tubing (2" Receiver)
Curt ManufacturingCurt Manufacturing 49240
27" Safety Chain with 1 Snap Hook (5,000 lbs., Clear Zinc)
Curt ManufacturingCurt Manufacturing 80313
3" OEM-Style Gooseneck Hitch Ball, 30,000 lbs.
Curt ManufacturingCurt Manufacturing 60628
3" x 3" Surface-Mounted Tie-Down D-Ring (3,600 lbs., Yellow Zinc)
Curt ManufacturingCurt Manufacturing 83740
3-in-1 ATV Ball Mount with 2" Shank and 1-7/8" Trailer Ball
Curt ManufacturingCurt Manufacturing 45005
3/8" Snap Hook (2,000 lbs.)
Curt ManufacturingCurt Manufacturing 81266
35" Safety Chain with 1 Clevis Hook (11,700 lbs., Clear Zinc)
Curt ManufacturingCurt Manufacturing 80314
35" Safety Chain with 1 Clevis Hook (18,800 lbs., Yellow Zinc)
Curt ManufacturingCurt Manufacturing 80304